• Home
• Forms
  General Contact Form Biological Treatment Background Form Wastewater Sample Request Distributor Application DAF Request Evaporation Project Produced/Frac Water Treatment Form Restaurant Scrubber Form Reverse Osmosis Form Wet Scrubber Pollution Control Form
• Contact Us
• About Us
• Calculators
  Chemical Preparation and Operating Parameters Jar Testing Parameters Filter Press Sizing Application Flat Bottom Liquid Tank Volume Mesh / Micron Sizing Table Standard Cubic Feet per Hour (SCFH)
• Site Map
• Search Site

Specialty Chemicals for Effluent Water Treatment > Chemical Descriptions

EB 1

EB 1 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. Eco 1 can be used by itself or in combination with other EB products.

EB 1 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 1)
Appearance	Clear to light yellow liquid
Specific Gravity	1.1 @ 70° F
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 2

EB 2 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. EB 2 can be used by itself or in combination with other EB products.

EB 2 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 2)
Appearance	Clear to light yellow liquid
Specific Gravity	1.1 @ 70° F
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 3

EB 3 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. EB 3 can be used by itself or in combination with other EB products

EB 3 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 3)
Appearance	Clear to light yellow liquid
Specific Gravity	1.1
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 4

EB 4 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier for soluble oils and coagulant for waste water treatment. EB 4 can be used by itself or in combination with other EB products.

EB 4 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 4)
Appearance	Clear amber liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 10C

EB 10C is a blend of cationic polyelectrolytes in water. It is used as a coagulant in waste water treatment applications. EB 10C can be used by itself or in combination with other EB products.

EB 10c can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 10C)
Appearance	Clear liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	7
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 16

EB 16 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. EB 16 can be used by itself or in combination with other EB products.

EB 16 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 16)
Appearance	Clear amber liquid
Specific Gravity	Approx. 1.1
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 25 Metal Precipitant

EB 25 is an aqueous solution of a heavy metal precipitant effective in precipitating low concentrations of precious and heavy metal ions from industrial aqueous effluent. EB 25 is recommended as a polishing chemical for effluent containing 10-500 ppm total metal ion, but should also be considered as an alternative to inadequate conventional techniques for precipitation of much higher levels of metal ions. EB 25 is extremely effective in precipitating copper, even from solutions containing complexed or chelated copper. It is also effective on other metals including cadmium, chromium (III), gold, iron, magnesium, mercury, nickel, silver , and zinc.

EB 25 is not recommended for aluminum, arsenic, chromium (VI) and molybdenum. The sludge cake produced from its use as heavy metal precipitant is compact, highly insoluble, and easily dewatered. Its low solubility means that is less susceptible to leaching and it is more likely to pass leaching tests such as those required by the U.S. EPA.

Recommended dosage for EB 25 (ppm EB 25/ ppm Metal)
Metal	Dosage
Ag (I)	4
Au (I)	2
Au (III)	6
Cd (II)	7
Cu (I)	6
Cu (II)	12
Fe (II)	14
Fe (III)	21
Hg (I)	2
Hg (II)	4
Mg (II)	33
Ni (II)	13
Zn (II)	12

EB 28 Metal Precipitant

EB 28 is a sodium salt designed for use as an efficient metal precipitant. EB 28 is intended to complement EB 25 metal precipitant. EB 28 provides more cost effective removal of some selected heavy metals from waste streams when compared to other precipitants. EB 28 provides an alternative product that is less toxic to aquatic species. In addition, the volume and weight of sludge per unit of metal is substantially less than alternative products. This benefit allows for substantial savings in sludge disposal costs. EB 28 is effective in the removal of complex chelated metals, and can also be used to recover expensive metals.

Benefits
Cost Effective Metal Removal Precipitates Complexed or Chelated Metals Lower Aquatic Toxicity Than Other Precipitates Effective Against All Multivalent Metal Ions Reduces Chrome +6 to Chrome +3 for Precipitation	Produces Dense Sludge Produces Low Volume of Sludge Forms Easily Dewatered High Solids Sludge Functions Over a wide range of pH and Temperature Easily Monitored by Oxidation Reduction Potential

Metal EB 28
Cd (II)	1.4
Co (II)	2.6
Cr (VI)	4.4
Cu (II)	2.4
Fe (II)	2.8
Hg (II)	0.8
Ni (II)	2.6
Pb (II)	0.7
Zn (II)	2.4

EB 42A

EB 42A is a blend of anionic polyelectrolytes in water. It is used as a flocculant in waste water treatment. WEB 42A can be used by itself or in combination with other WEB products.

EB 42A can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 42A)
Appearance	Clear liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	7
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 49A

EB 49A is a blend of anionic polyelectrolytes in water. It is used as a flocculant in waste water treatment. WEB 49A can be used by itself or in combination with other WEB products.

EB 49A can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 49A)
Appearance	Clear liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	7
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 1500

EB 1500 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. EB 1500 can be used by itself or in combination with other EB products.

EB 1500 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 1500)
Appearance	Clear to light yellow liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 1523

EB 1523 is a blend of non-ionic and cationic surfactants in water. It is used as a demulsifier and coagulant for waste water treatment. EB 1523 can be used by itself or in combination with other EB products.

EB 1523 can be injected directly from the drum. Optimum dosage, temperature, and extent of mixing should be determined for a cost effective operation.
Caution: This product is a corrosive liquid. Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed.

Typical Chemical Properties (EB 1523)
Appearance	Clear light to yellow liquid
Specific Gravity	Approx. 1.1 @ 70° F
Flash Point	Not Applicable
pH	2-3
Odor	Nonspecific
Solubility	Water Soluble
Shelf Life	One year

EB 2003

EB 2003 is a cationic, medium molecular weight coagulant. It is effective in liquid/solids separation processes including water and wastewater clarification, flotation and in-line filtration.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2003 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2003)
Appearance	Clear liquid
Specific Gravity	1.08-1.16 @ 70° F
Viscosity	Approx. 70-100 cps
Freezing Point	28° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year

EB 2004

EB 2004 is a highly cationic, low molecular weight coagulant. It is effective in liquid/solids separation processes including water and wastewater clarification, emulsion breaking and downflow direct filtration.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2004 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2004)
Appearance	Straw Colored Liquid
Specific Gravity	1.08-1.16 @ 70° F
Viscosity (@20° C)	Approx. 400-1000 cps
Freezing Point	28° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year

EB 2005

EB 2005 is a highly cationic, low molecular weight coagulant. It is effective in liquid/solids separation processes including water and wastewater clarification, emulsion breaking and downflow direct filtration.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2005 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2005)
Appearance	Straw Colored Liquid
Specific Gravity	1.08-1.16 @ 70° F
Viscosity (@20° C)	Approx. 70-100 cps
Freezing Point	28° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year

EB 2006

EB 2006 is a highly cationic, high molecular weight coagulant. It is effective in liquid/solids separation processes including water and wastewater clarification, flotation and in-line filtration. It is chlorine resistant and approved by the Environmental Protection Agency for potable water treatment at dosages up to 20 ppm.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2006 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2006)
Appearance	Straw Colored Liquid
Specific Gravity	1.08-1.16 @ 70° F
Viscosity (@20° C)	Approx. 200-400 cps
Freezing Point	28° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year

EB 2007

EB 2007 is a highly cationic, medium molecular weight coagulant It is effective in liquid/solids separation processes including water and waste water clarification, flotation and in-line filtration.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2007 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2007)
Appearance	Clear Liquid
Specific Gravity	1.08-1.16 @ 70° F
Viscosity (@20° C)	Approx. 600-1000 cps
Freezing Point	28° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year

EB 2008

EB 2008 is a highly cationic, high molecular weight coagulant. It is effective in liquid/solids separation processes including sludge dewatering, upflow in-line filtration, flotation, emulsion breaking, and water and waste water clarification.

Storage in glass, stainless steel, plastic, or epoxy-lined vessels is recommended. Do not use aluminum or iron in feed or storage systems. If freezing occurs, product may be used after being thawed and thoroughly mixed. Clean spills by first wiping or scooping up as much as possible, then flush with water.
Caution: Spilled product can be very slippery. EB 2008 is shipped either in bulk or in 55 gallon non returnable drums. For information on bulk delivery, please contact us directly.

Typical Chemical Properties (EB 2008)
Appearance	Clear Yellow to Orange Liquid
Specific Gravity	1.08-1.16 @ 25° F
Viscosity (@20° C)	Approx. 3000-5000 cps
Freezing Point	5° F
pH	5.5 - 6.5
Odor	Nonspecific
Solubility	Nonreactive
Shelf Life	One year