 |
 Applications |
 Automotive |
| Biodiesel |
| Dairy Industry |
| Industrial Wastewater |
| Food Processing Industry |
| Iron Removal |
| Latex Removal |
| Metals Treatment |
| Mining Industry |
| Municipal Wastewater |
| Odor Control |
| Petrochemical Industry |
| Poultry Industry |
| Products |
| Activated Carbon |
| Bag Filtration |
| Biological Treatment |
| Chemicals (Specialty) |
| Clarifiers |
| Controls |
| Dissolved Air Flotation |
| Dewatering |
| Evaporators |
| Membrane Filtration |
| Microbial Bacteria |
| Oil/Water Separators |
 Above Ground Separators |
| Below Ground Separators |
| Bilge Oil Removal System |
| Liquid Phase Vessels |
| Ozone |
| Pressure Filtration |
| Screens |
| Separators/Strainers |
| Tanks |
|
OilFree Products / OilFree Bilge Filtration, Air Compressor Filters & Coolant Filters
Bilge Oil Filters
 |
OilFree
Bilge Water Cleaning Filters
The OilFree bilge cleaning unit utilizes OilFree
HRM technology for filtering oils, sheen, gas,
diesel and other hydrocarbon fuels from bilge
water. OilFree bilge cleaning units enable the
boats and vessels to maintain less than 15 ppm
of hydrocarbons in their overboard bilge water
discharge. The bilge units are either deployed
as stand alone bilge water filtration units or
post Oily Water Separator or as part of a turn
key oily bilge water filtration and treatment
systems. OilFree BK-1, BK-2 and BK-3 units are
available in three sizes based on flow capacity
and hydrocarbon removal capacity.
|
Flow Capacity:
Cartridge size:
Unit height:
Unit diameter:
Fittings inlet/outlet (FMPT)
|
BK-1
4.4 GPM or 1 cu.m/h
2.5" Dia. x 10"h
14"
3 1/4"
3/4" |
BK-2
11 GPM or 2.5 cu.m/h
4.5" Dia. x 10"h
14"
7 1/4"
1 1/2" |
BK-3
22 GPM or 5 cu.m/h
4.5" Dia. x 20"h
24"
7 1/4"
1 1/2" |
|
Applications:
- Filtering fuel oils from bilge water in recreational
boats and vessels
- Post Oily Water Separator treatment and filtration
system
- Membrane organic prefiltration - protection of membranes
from organic fouling
- Coalescer filter media in Oily Water Separators
|
 |
Benefits
With a combination of an opaque housing and one
clear housing the operator can see the oil filter
into the clear housing and know that the cartridge
in the opaque housing needs changed. |
Air Compressor Filters
 |
In-Line
Compressed Air Purifier
OilFree Compressed Air Purifier is utilized to
filter oils and other hydrocarbon-based mists
from compressed air with minimal pressure drop
across the filter. The In-Line Compressed Air
Purifier is superior to any other in-line air
filters in its ability to capture the oil mists
without re-release. Effectively removing the oil
mist at less than 1 psi pressure drop enables
low maintenance and easy operation. Re-release
of captured oil as exhibited by other filters
can damage and adversely affect air driven processes.
(see graph) |
 |
Technical Specifications
Maximum operating pressure: 60 - 100 psi
Housing material: Sump: SS 304/316 - Head: Brass/Nickle
Operating pressure drop: <15 inches of water
Available in multi-round housings up to
40" cartridge
Applications
When high purity oil-free air is required such
as medical/pharmaceutical, electronic fabrication
and assembly, food processes, filters, pneumatics
and forced air drying processes.
|
 |
OilFree
Air Compressor Cartridridges (ACC)
OilFree compressor cartridges filters oil from
the condensate of the air compressor. It is deployed
in the condensate purge or return line producing
an oil free condensate capacity or can be discharged
safely in to the sewer. By quickly filtering out
oils utilizing OilFree Compressor Cartridges,
the condensate drain rate can be increased thereby
improving the efficiency of the compressor and
resulting in substantial cost savings. A particle
prefilter is highly recommended fro the OilFree
Compressor Cartridge unit when the condensate
is contaminated with particles and metal chips
in addition to oils. |
Technical Data:
Flow Rate: Operational range: 0.25 - 5 GPM per
10" (length of cartridge)
Filter Length: 10", 20", 30" and
40"
Filter Diameter: 2 1/2"
Filter Housing Material: Polypropylene for 10"
filters, SS 304/16 for 10", 20", 30"
and 40" filters
Applications:
Compressor Condensate return and reuse
Compressor Condensate discharge into the sewer |
Coolant Filters
 |
In-Line
Coolant Cleaning Filters
Increases the life of machining coolants
and wash/rinse water bath.
OilFree In-Line coolant and wash/rinse water cleaning
filters preserve the quality of maching processes.
By filtering the contamination from the wash/rinse
water, the OilFree In-Line cleaning filters are
able to reduce particle filter or include an adequate
particle filter unit with the in-line cleaning
filters. The OilFree in-line filters have been
successfully tested to preserve the integrity
of various components and characteristics of the
coolant/rinse solution.
Technical Data:
Flow capacity: 0.25 - 20 GPM
Operational pressure drop across the filter: <1
psi
The filters are designed to fit standard 10"
filter housings or standard 10" & 20"
BB housings |
 |
|
|
