BioClear / High Rate Multi-Media Tertiary Filters
| Ecologix High-Rate, Multi-Media Tertiary Filters separate the BioClear packaged sewage treatment plant from the rest. This technology is superior to any tertiary filter on the market. The Mult-Media Tertiary Filter will elimate organic and inorganic solids down to 5 microns or less. Through the use of mutiple layers of specially selected media, "progressive filtration" is achieved. |
Ecologix High-Rate Mult-Media Tertiary Filters
Ecologix high rate automatic backwashing Multi-Media Tertiary Filters
are designed for enhanced capability water filtration.
These pressurized automatic backwashing filters
will remove organic and/or inorganic suspended
solids down to 10 microns in size and larger and
will entrap greater amounts of suspended solids
contaminants than sand media filters. Through
the use of automatically controlled backwashing,
the filter will operate "on-line" for
extended periods of time prior to the short backwashing
cycle. Automatic filter operation is monitored
on both elapsed time as well as pressure differential.
The extraordinary pressure that these tertiary vessels offer aid in forcing solids, organics and any substance to filter out better than any other media filter on the market. Four specially blended layers of media include a base of crushed rock for support, two layers of specially sized crushed garnet and anthracite filter the treated water down to a constant 5 mg/L of Total Suspended Solids. This combination has been specifically designed and proven to obtain the best results in conventional wastewater filtration.
|
 |
The
Ecologix Multi-Media Tertiary Filters utilize a vertical
side shell depth of 60" with layered graded
beds of filtration media. Through the use of our multiple
layers of specially sized filter media, "progressive
filtration" is achieved through the media
layers. The first layer of filter media entraps
and holds about 70% of the suspended solids, allowing smaller particles to be removed in subsequent media layers. With the use of the finely crushed garnet the filter media excites Brownian movement, Van der Waal settling and electrostatic gravitational forces on fugitive dirt particles. This accounts for the fact that 45 micron interstitial void space (between stacked media grains) will capture micronic particulate down to 10 microns and smaller.
Our Multi-Media Tertiary Filters are ideally suited for
use where stringent water quality standards are
required or where higher levels of suspended solids
are present. These applications can include re-use
applications, water pre-treatment applications
for reverse osmosis and de-ionization systems or in this case a specially designed tertiary filter for our BioClear package sewage treatment plants. Our Multi-Media Filters
are also widely used as primary filters for removal
of suspended solids in incoming plant water or
in waste water cleanup applications.
Standard
Systems Include:
- Filtered water backwash on multi-tank systems
- All interior surfaces fusion epoxy coated
with Scotchkote 134
- Advanced solid state automation with elapsed
timer and differential pressure control
- Skid mounted on structural steel skid
- Liquid filled stainless steel pressure gauges
- Flanged in/out standard (grooved - optional)
|
- Automatic diaphram operated non-corrosive
brass or cast iron valves
- Systems provided with interconnecting piping
- Removeable 304 stainless steel underdrain
standard
- ASME code stamped available
- Filtration media is included in the system
package
|
| 3,000 - 35,000 |
3060-3A |
75-221 |
294 |
60.0 |
14.73 |
74 |
4" |
100 |
8'-3" |
2'-9" |
8'-8" |
| 40,000 - 90,000 |
3660-3A |
105-320 |
426 |
85.5 |
21.30 |
107 |
4" |
100 |
9'-9" |
3'-3" |
9'-3" |
| 95,000 - 100,000 |
4860-3A |
189-567 |
756 |
154.4 |
37.80 |
189 |
6" |
80 |
12'-9" |
4'-3" |
10'-2" |
Applications
Automotive
