Hour)

The H2Ozone 60 Ozone Injection System is designed to quickly integrate into an existing water line. This system produces 60 g/hr of ozone and is able to inject this ozone into water flows up to 125 GPM. This water can be used for food processing, surface disinfection or basic water treatment.

H2Ozone 60 Features

Introduces 60 grams/hour ozone into up to 125 GPM water flows
Produces ozone from integrated Oxygen Concentrator
Will provide 100 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
Dimensions: 36-in Deep x 42-in Wide x 72-in High - 625 Lbs
Customizable system can be configured for your specific application
Very efficient with excellent mass transfer of ozone
Stainless Steel ASME off-gas tank
Stainless Steel pump with Viton Seal
All plumbing and fittings are stainless steel
Tri-Clamp connections are used
Included water trap protects ozone generator from any water damage

H2Ozone 60 Specifications
Flowrates:	Up to 125 GPM water flow (flow rates from 5-125 GPM are acceptable)
Ozone Production:	60 gm/hr
Oxygen Production:	20 LPM O2 @ 93% purity
Capacity:	Will dissolve ozone into water at the following rates: 50 GPM with 4.0 PPM Ozone 100 GPM with 2.0 PPM Ozone Dissolved ozone levels of at least 2.0 PPM at 100 GPM
Wetted Materials:	Stainless Steel, Viton seals & Kynar injector
Power Required:	220V/60Hz (220V/50Hz Available)
Remote Start:	System can be started remotely using provided contacts in the controller
Ozone Generation Method:	Via corona discharge using dry air
Maximum Operating Pressure:	50 PSI (3.5 Bar)
Maximum Water Pressure:	100-PSI (7 bar)
Water Connection:	2-in Tri-Clamp inlet & outlet
Water Pressure drop at 50 GPM	less than 3 PSI
Warranty:	1-year
Dimensions:	36-inches deep x 42-inches wide x 72-inches tall
Weight:	625 lbs

H2Ozone 60 Optional Equipment
Water Flow switch	Will start and stop system automatically based upon water flow
Dissolved Ozone Sensor	Monitors, displays, and controls actual ozone levels in the water
ORP Monitor	Monitors ORP level in the water, will also control dissolved ozone levels in the water
Ambient Temp Sensor	Monitors Ambient temperature to protect ozone generator and oxygen concentrator
Ambient Relative Humidity Sensor	Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator
Hour Meter	Displays Ozone generator run time, good for determining required maintanance intervals
Ozone Destuct Unit	Will revert all excess ozone from the contact tank to oxygen
Plant Compressed Air	Use customer supplied compressed air and remove system compressor and replace with pressure regulator, and filter and offers lower power consumption and less system maintenance
Remote Ozone Monitor	Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use

Email Spam Protection