 |
 Applications |
 Automotive |
| Biodiesel |
| Dairy Industry |
| Industrial Wastewater |
| Food Processing Industry |
| Iron Removal |
| Latex Removal |
| Metals Treatment |
| Mining Industry |
| Municipal Wastewater |
| Odor Control |
| Petrochemical Industry |
| Poultry Industry |
| Products |
| Activated Carbon |
| Bag Filtration |
| Biological Treatment |
| Chemicals (Specialty) |
| Clarifiers |
| Controls |
| Dissolved Air Flotation |
| Dewatering |
| Evaporators |
| Membrane Filtration |
| Microbial Bacteria |
| Oil/Water Separators |
| Ozone |
| Pressure Filtration |
| Screens |
| Separators/Strainers |
| Tanks |
|
The H2Ozone Injection Skid designed to quickly integrate into an existing pressurized water line. Ozone from another source can be very effiently introduced into the water. Very good mass transfer will be realized, all undissolved gas will be off gassed through degassing vent.
H2Ozone Skid Features
- Very efficient with excellent mass transfer of ozone
- Ready to install / turnkey skidded solution - simply provide the ozone gas
- Will treat up to 30 GPM
- Creates vacuum for ozone injection motive flow
- Comparatively small and compact footprint
- All stainless steel & kynar construction
- Easy to operate
- Built in ozone generator protection device for added safety
- Very affordable solution
|
|
| Flowrates: |
Up to 30 GPM water flow (flow rates from 5-30 GPM are acceptable) |
| Wetted Materials: |
304 Stainless Steel, Viton seals & Kynar injector |
| Power Required: |
110V/60Hz (220V/50Hz Available) |
| Mounting: |
Can be floor or wall mounted |
| Maximum Water Pressure: |
100-PSI (7 bar) |
| Water Connection: |
1.5-in FNPT inlet & outlet |
| Water Pressure drop at 30 GPM |
less than 1 PSI |
| Warranty: |
2-years |
| Dimensions: |
32-in x 25-in x 16-in (HxWxL) 82-cm x 64-cm x 41-cm |
| Weight: |
100 lbs (45 kg) |
|
