|
Compact
Feeders for Transportation of Granular Products
- Rapid movement of material Accurate
and reproducible
- Non-reactive materials of construction
- 3 Tank sizes available
This is a family of feeders
designed to feed granular Flocculation products
for simple transfer, batch processing or
continuous processing. They can lift up
to 24 vertical feet and can be set up in
a small area. Delivery rate can be as high
as 10 lbs per minute. The units are available
in three configurations. The standard unit
is a stand-alone unit, where a predetermined
amount of material is poured into the hopper
and the valve is opened, delivering the
material to the desired destination. The
batch unit is programmed via a timer to
deliver a preset amount of material on a
repetitive, set time basis. The continuous
unit will deliver a preset amount of material
via an externally generated input signal
on a demand basis.
Material is gravity fed into a venturi type
injector chamber where the material is accelerated
by compressed air through a rigid plastic
pipe to the top of a tank or other vessel.
The injector has a flexible outlet tubing
to facilitate easy physical alignment of
the delivery piping. These units are available
with cone capacities of 150 lbs., 300 lbs.
and 600 lbs. or can be adapted to use with
a 2,000 lb. bulk bag of material. |