Continuous Flow Systems (CFS)
![]() |
CFS OverviewThe CFS (Continuous
Flow Systems) is designed to easy treatment of a continuous stream of wastewater. The unit is fully automated with the only operator intervention required being the refilling of the flocculant and disposable media. The system has a monitoring system that sounds an alarm when restocking of media is required or when the treatment process is interrupted. Proven results for reduced TDS/TSS levels, lower
residual heavy metals and lower cost per gallon treated using this approach.
Continuous process units range from 5 gpm to 40 gpm. Additional options are available for increased flocculation with pre-ozonation, water purification with post-ozonation and increased efficiency of de-watering and drier cakes. CFS Features
|
CFS Models Available
Model | Flow Rate | Reaction Tank Capacity | Paper Width | Length | Width | Height | Amperage |
CFS-05 | 5 U.S Gal / 19 Liters | 100 U.S Gal / 379 Liters | 24" / 61 cm | 84" / 214 cm | 42" / 107 cm | 90" . 214 cm | 20 |
CFS-20 | 20 U.S Gal / 76 Liters | 250 U.S Gal / 946 Liters | 42" / 107 cm | 108" / 275 cm | 60" / 152 cm | 96" / 244 cm | 20 |
CFS-40 | 40 U.S Gal / 151 Liters | 400 U.S Gal / 1514 Liters | 60" / 152.4 cm | 132" / 335 cm | 80" / 203 cm | 104" / 244 cm | 30 |
CFS Available Options
- Vacuum
assisted dewatering table
Incorporation of a vacuum pump and table plate to pull the water from the paper & cake on the dewatering table for the drier cake sludge. - Pre-ozonation
skid for increased flocculation
This is a separate skid mounted unit for Pre-Flocculation ozonation to assist in breaking down oils and start metal precipitation, this can reduce Flocculant usage by as much as 30%. - Post
ozonation skid for increased purification
This is a separate skid mounted unit for Post Flocculation ozonation to aid in reduction of bacterial and microbial contaminants where water is going to be reused.
Download Technical Drawing
System Configuration with Aeration

System Configuration with Ozone Injection
