• Home
• Forms
  General Contact Form Biological Treatment Background Form Wastewater Sample Request Distributor Application DAF Request Evaporation Project Produced/Frac Water Treatment Form Restaurant Scrubber Form Reverse Osmosis Form Wet Scrubber Pollution Control Form
• Contact Us
• About Us
• Calculators
  Chemical Preparation and Operating Parameters Jar Testing Parameters Filter Press Sizing Application Flat Bottom Liquid Tank Volume Mesh / Micron Sizing Table Standard Cubic Feet per Hour (SCFH)
• Site Map
• Search Site

Oil Water Separators > Below Ground Oil Water Separators

Oil water separators are systems used as an efficient method to separate oils and some solids from a variety of wastewater discharges. They are typically installed in industrial and maintenance areas and receive oily wastewater. Our line of above ground oil water separators will assist in the removal of large quantities of free oil from your wastewater before any further treatment step you may have in your process. We have below ground oil water separators with flow rates ranging from 20 to 2000 gallons per minute and capacities up to over 20,000 gallons.

Features Low maintenance cost Easily cleaned through the removable vapor tight cover(s) No moving parts or consumables No power consumption No chemicals, absorbent or filter cartridges to remove, replace or dispose of Service & maintenance of coalescing media and removal of sludge from outside No confined spaces Shallow burial depth HQB Series Diagram.PDF | HQB Ballast & Pad Specs | HQB Series - How They Work

Technical Features HQB's Oil/Water Separators are versatile and can be used in many different applications. Plasteel Elutron Jacketed Oil Water Separators are in a unique double wall jacketed construction with 360 degree interstitial monitoring. Primary tank of welded steel construction in accordance with UL 58. Secondary containment is constructed of FRP laminate that does not become brittle or soft below or above ground and has been successfully tested to UL 1746 requirements for corrosion protection. Cathodic protection and/or dielectric isolation not required. The Unipack cross fluted plates are manufactured of PVC, CPVC, PP, SS, or FRP. Sizes available up to GPM.

Dimensional Parameters for Ecologix Below Ground Oil Water Separators
MODEL	DIA.	LENGTH	INLET	OUTLET	FLOW RATE	TANK CAPACITY (GAL.)	OIL SPILL CAPACITY (GAL.)
HQB342	3' - 9 "	4' - 5 "	4"	4"	20	400	320
HQB548	4' - 0"	6' - 3 "	4"	4"	50	600	480
HQB1048	4' - 0"	10' - 9"	6"	6"	100	1000	800
HQB2064	5' - 4"	12' - 0"	6"	6"	200	2000	1600
HQB3064	5' - 4"	18' - 0"	8"	8"	300	3000	2400
HQB4072	5' - 4"	24' - 0"	8"	8"	400	4000	3200
HQB5072	6' - 0"	23' - 10"	8"	8"	500	5000	4000
HQB6072	6' - 0"	28' - 8"	10"	10"	600	6000	4800
HQB7084	7' - 0"	24' - 4 "	10"	10"	700	7000	5600
HQB8084	7' - 0"	28' - 0 "	10"	10"	800	8000	6400
HQB9096	8' - 0"	24' - 0"	12"	12"	900	9000	7200
HQB10096	8' - 0"	26' - 8"	12"	12"	1000	10,000	8000
HQB12096	8' - 0"	32' - 0"	12"	12"	1200	12,000	9600
HQB15121	10' - 0"	25' - 6"	14"	14"	1500	15,000	12,000
HQB21120	10' - 0"	34' - 0"	18"	18"	2000	20,000	16,000

Operation
The separator is a special purpose prefabricated parallel corrugated plate gravity displacement type oil/water separator designed to remove free and dispersed non-emulsified oil and sellable solids, in accordance with API 421. The separator capacities, dimensions, and construction will be in strict accordance with UL 58, and UL 1746. Separator shall be comprised of a tank containing:

Inlet Compartment
The inlet chamber will be comprised of a non-clog diffuser pipe to distribute the flow across the width of the separator chamber. The inlet compartment shall be of sufficient volume to effectively reduce influent suspended solids, dissipate energy and begin separation. A sludge baffle will be provided to prevent settlable solids and sediment from entering the separation chamber.

Separation Chamber
The separation chamber will contain parallel corrugated plates for enhanced oil/water separation. The plates will be spaced for optimum removal of free oil and settleable solids, and the corrugations will have a 45 degree angle with respect to the horizontal. Flow through the plate pack will be in a cross-flow configuration. This allows the oil to collect and coalesce in the high points of the corrugations while the solids collect at low points. This also allows oil to rise without interfering. Plates shall be enclosed in a stainless steel frame to facilitate installation and removal.

Sludge Chamber
The sediment chamber will be located prior to the separation chamber and will provide an adequate volume and baffling for the settling of any solids.

Oil Storage Reservoir
The waste oil storage is an integral part of the separator, and has a capacity of 40 percent of the total separator volume. Oil will flow from the separator by gravity or can be pumped away when the oil water interface reaches a predetermined depth.

Clean Water Chamber
A clean water chamber which allows the water to leave the separator by gravity flow through the clean water drop tube and outlet flange will be provided.

Covers
Manways and vaults will provide access into the separator. Each accessway will be provided complete with extensions, bolt down cover, gasket, and bolts.

Vents and Hold Down Strap
Sufficient size vents and hold down straps will be provided.

Performance
Most extensive performance guarantees offered in the industry.
Removes free oil droplets as small as 40 microns.
Reduces effluent free oil concentration to 10 PPM or less.
Factory tested prior to shipment.
Performance Guarantee Based on Influent Characteristics.
Elutron tanks carry a (5) five year warranty on material and workmanship and (30) years against external corrosion.
P.E. Stamped Calculations for Reynolds Number and Stokes Law.