Self-Cleaning Filters / Jet-Disc & Jet-Screen Filters

• Centrifugal Cleaning Action Minimizes Maintenance
• Large Disc Surface Area, with Three-Dimensional Depth
• Particles Can Be Flushed While Filter Is In Operation
• Several Color-Coded Disc Options Available
• Durable, Corrosion-Resistant, Injection Molded Housing
• Easily Removable, Quick Clamp Lid Assembly
• Pressure Gauge Ports Molded Into Housing
• Mounting Bracket (sold separately)

• Dirty Water Enters the Filter Housing Through the Inlet Connection
• As Dirty Water Passes Through the Helix-Element, the Water Starts to Spin at High Velocity. This Centrifugal Action Spins the Particles Away From the disc media, Minimizing Manual Cleaning Frequency.
• As Particles Are Spun Down to the Base of the Filter, They are Flushed Via the 3/4" Female Threaded Flush Port Connection.
• The Dirty Water Passes From the Outside to the Inside of the disc. The grooves, molded into the surface of the three-dimensional discs, trap the remaining contaminants in the water.
• After Passing Through the discs, the Filtered Water Flows Upward and Exits the Filter Through One of the Outlets. The Outlet Not Being Used is Terminated With a Threaded Cap.

• 2"/100 GPM Max.* @ 3.5 PSI Loss
• 2" Super/100 GPM Max.* @ 3 PSI Loss
• 3"/200 GPM Max.* @ 5 PSI Loss
  
  Multiple pods are manifolded for higher flow rates
  * Maximum flow rates should be derated for
  high solids loading, particularly for finer
  mesh sizes.

Construction Materials

• Housing: Polyamide
• Disc: Polypropylene
• Gaskets: EPDM
• Filter Pod Clamp: Stainless Steel 316
  
  

Pressure Rating - All units rated to 125 PSI

Temperature Rating - All units rated to 140°F

Inlet/Outlet Configurations

• 2" and 3" Models Available with NPT and/or
  Victaulic Inlet/Outlet Connections
• In-line and 90 Degree Configurations Standard
  (Filter is supplied with a cap for outlet port not being used
• 200 Micron (80 Mesh)
• 130 Micron (150 Mesh)
• 100 Micron (120 Mesh)
• 50 Micron (270 Mesh)

Specifications for the Jet-Disc JD will apply to the Jet-Screen JS unless otherwise included below.

Features

• Centrifugal Cleaning Action Minimizes Maintenance
• Large Screen Surface Area With Maximum Open Area
• Particles Can Be Flushed While Filter is in Operation
• Several Type 316 Stainless Steel Mesh (and Perforated) Options Available
• Durable, Corrosion-Resistant, Injection Molded Housing
• Easily Removable, Quick Clamp Lid Assembly
• Pressure Gauge Ports Molded Into Housing
• Mounting Bracket (sold separetly)
• Housing: Polyamide
• Screen: Stainless Steel (Type 316)
• Gaskets: EPDM
• Filter Pod Clamp: Stainless Steel (Type 316)

Specs & Dimensions
JS-2NA
JS-2SA
JS-3NA
JS-2NW
JS-2SW
JS-3NA

• Dirty Water Enters the Filter Housing Through the Inlet Connection.
• As Dirty Water Passes Through the Helix-Element, the Water Starts to Spin at High Velocity. This Centrifugal Action Spins the Particles Away From the Screen, Minimizing Manual Cleaning Frequency.
• As Particles are Spun Down to the Base of the Filter, They are Flushed Via the 3/4" Female Threaded Flush Port Connection.
• The Dirty Water Passes From the Outside to the Inside of the Stainless Steel Screen. The Screen Captures the Remaining Light and Fibrous Contaminants in the Water.
• After Passing Through the Screen, the Filtered Water Flows Upward and Exits the Filter Through One of the Outlets. The Outlet Not Being Used is Terminated With a Threaded Cap.

• Housing: Polyamide
• Screen: Stainless Steel (Type 316)
• Gaskets: EPDM
• MESH OPTIONS: 16, 30, 40, 50, 60, 80, 100, 120, 150, 200
• PERF OPTIONS:
  1/4" Perforated, 1/8" Perforated, 5/64" Perforated,1/16" Perforated