 |
 Applications |
 Automotive |
| Biodiesel |
| Dairy Industry |
| Industrial Wastewater |
| Food Processing Industry |
| Iron Removal |
| Latex Removal |
| Metals Treatment |
| Mining Industry |
| Municipal Wastewater |
| Odor Control |
| Petrochemical Industry |
| Poultry Industry |
| Products |
| Activated Carbon |
| Bag Filtration |
| Biological Treatment |
| Chemicals (Specialty) |
| Clarifiers |
| Controls |
| Dissolved Air Flotation |
| Dewatering |
| Evaporators |
| Membrane Filtration |
| Microbial Bacteria |
| Oil/Water Separators |
| Ozone |
| Pressure Filtration |
| Screens |
| Separators/Strainers |
 Hydrocyclone Separator |
| Self Cleaning Suction Filter |
| Preliminary Strainers |
| Automatic Jet-Disc Filter |
| Automatic Jet-Disc Skid Mounted |
| Cone Filters |
| Tanks |
|
The Automatic Jet-Disc Skid Mounted Filter System sets the new standard for side-stream cooling tower water filtration. Available in a single-pod model as well as multiple pod models, the Jet-Disc uses a fraction of the flush water used by traditional sand filters. The Jet-Disc is effective in removing particulate (sand, sediment, etc.) as well as light airborne contaminants (cottonwood seed, algae, etc.), both of which are commonly found in cooling tower water. |
Benefits of the Jet-Disc System:
- Improves Heat Transfer Resulting in a Reduction in Energy Costs.
- Cuts Maintenance Costs Dramatically By Decreasing Downtime for Cleaning and Repair
- Complements Chemical Treatment Program Therefore Reduces the Cost of Water Treatment
- Increases Lifespan of Downstream Equipment Such As Heat Exchangers, Process Equipment, ETC
|
 |
Complete Systems Include
- Automatic Filters/Disc Cartridges
- Stainless Steel Inlet/Outlet Manifolds
- Automatic Backflush Valves/Solenoids
- MAXIM Backwash Controller
- Stainless Steel Leg Assembly
- Pump & Motor Starter Relay
- Pressure-Sustaining Valve (on multiple pod systems only)
- Skid Assembly (stainless steel or plastic)
- Air-Override Feature (air enhances backflush efficiency)
|
Optional Features
- Isolation Valves
- Pump Pre-Strainer (with perforated screen)
- Air Compressor (if compressed air is not available)
Flow Rates for a Single Automatic Filter Pod*:
- 2"/70-GPM Max. Per Filter Pod
- 3"/100-GPM Max. Per Filter Pod
*Multiple pods are manifolded for higher flow rates.
*Flow rates vary greatly depending on water quality, solids loading, and the micron size. |
Micron Sizes Available*:
- 200 MICRON (l50-mesh)
- 130 MICRON (l20-mesh)
- 100 MICRON (80-mesh)
- 50 MICRON (270-mesh)
- 20 Micron (700 Mesh)
*Centrifugal spinning action increases micron efficiency.
Results vary depending on specific
|
Materials of Construction:
- Filter Housing: Polyamide
- Filter Discs: Polypropylene or K-Resin
- Inlet/Outlet Manifolds & Filter Leg Assembly: Type 304 Stainless Steel
- Backwash Valves: Bronze or Cast Iron Epoxy Coated
- Solenoids: Brass/Stainless Steel or Plastic (12vdc or 24vdc)
- Pressure-Sustaining Valve: Cast Iron Epoxy Coated (multiple pod systems only)
- Skid Assembly: Type 304 Stainless Steel or Plastic
- Backwash Controller: 120VAC
- Backflush Enhancing Air-Override Feature: 1/4" NPT Air Connection for Compressed Air
*Compressor is optional if compressed air is not available
Backwash Controller Options:
- Pressure Differential
- Elapsed Time
- Manual Override
|
 |
|
|
